Michelle working on the light table

Three panels cut out

Cutting glass on the light table

Michelle adds newly cut pieces to the lay out

Michelle cutting glass in her studio

Michelle behind the glass cutter

Michelle cutting glass for the ninth panel

Completely cut out panels pile up in the glass cutting room

First two completed and crated panels are stored, ready for delivery

Michelle working on the preparation for painting of the pieces for the ninth panel.

A crated panel in lifted with the ceiling hoist into position after cleaning and crating.

Michelle cutting the central piece of the ninth panel

Assembly of the third panel begins

Piece on the painting table receiving a coat of airbrushed on low fire enamel glass paint

On the painting table

Paint dries between coats with the aribrush

Michelle removes resist from a completly painted piece in preparation for firing

Michelle holds a piece of glass, having removed the resist and prepared the piece for the kiln.

Piece placed into kiln ready for firing overnight

Window #4 half assembled

Window #4 assembly and glazing completed

Pieces of the inner ring of the central panel being prepared for painting

Michelle working on the zodiac signs

Zodiac sign pieces are completed and ready for painting

Lay out of pieces ready for painting

Lay out of the central panel for alignment of painted pieces

Window #4 masked off for panting of the steel re-bar

Constellation pueces cut out and prepared for sandblasting

Window #4 installed into its shipping crate and ready for final cleaning

First four panels crated and ready for delivery

Partial assembly of panel #5

The center panel assembled

Panel number eight assembled

A panel masked off for painting the rebar

Studio crowded with panels being assembled, soldered and glazed

Panel ready to be glazed

A panel awaiting rebar

Michelle works on glazing the central panel

A panel complete with rebar, in its frame/crate awaiting final cleaning before packing for delivery

David begins the assembly of the final panel

David works on the assembly of the final panel

Assembly room full of panels

Central panel with rebar appled and painted

Studio filled with windows

A panel is hoisted onto the table so it can be cleaned from both sides,, simultaniously.

Michelle works on the final cleaning of one side

At the same time, David cleans each piece of glass from the spposite side

Each individual glass piece is wiped off while the window is in the upright position.

After it has been properly cleaned, the window is ready for packing and crating.

The central panel on the table for final cleaning

Panels crated awaiting delivery and installation.

A panel lifted to the table for final cleaning

Panels awaiting final cleaning

Michelle stands next to the nine crated windows, now ready for delivery and installation.